BCN3D Sigmax R19

Sigmax R19 #0

Properties

Build Volume 420 x 297 x 210 mm
Layer Resolution X 12.5 microns
Layer Resolution Y 12.5 microns
Layer Resolution Z 1 micron
Layer Resolution Low 500 micron (0.020 in.)
Layer Resolution High 50 microns
Nozzle Diameter 0.6
Filament Diameter 2.85

Documents

BrandBCN3D
Machine type 3D Printer
Technology FDM (Fused Deposition Modeling)
Materials PVA, PLA, ABS, Nylon, Bronze PLA, Brass PLA, Wood PLA, Polycarbonate (PC), ASA, Rubber-like (TPU), PETG , Carbon Fiber, colorFabb-XT (Amphora AM1800), Magnetic Iron PLA, Polypropylene, Green-TecPro
Websitehttps://www.bcn3dtechnologies.com/en/3d-printer/bcn3d-sigmax/
Average Price $5,090.00

About Sigmax R19

Sigmax R19 is a dual-extruder FDM 3D printer from BCN3D. Two extruders of this machine an run independently and the software allows to also set the machine up to “duplicate” or “mirror” mode to speed up the production. The printer also features the filament outage detection, the control is performed via a touchscreen.

Features:

  • Dual extrusion system
  • Color touchscreen
  • Enclosure with HEPA filters can be purchased separately
  • Heated Bed (100°C)
  • Filament outage detection
  • Bondtech high-tech dual drive gears
  • E3D extruders
  • Extruder temperature up to 280°C