3DiY BiZon Prusa i3 Steel

About BiZon Prusa i3 Steel

BiZon Prusa i3 Steel is the Prusa i3 Steel version with an enlarged 300x300x340 mm print area. A set for self-assembly. From its predecessors from the Prusa family, this 3D printer features a HARD STEEL HULL with reinforced ribs, an expanded print area, the ability to print various materials - ABS, PLA, HIPS, FLEX, PVA.

ВiZon P3Steel with dimensions 510х560х580 mm has a large construction area - 300х300х340 mm, which makes it the best option for personal use and small-scale production. The body design does not use studs or plastic parts - everything is made of steel. For greater rigidity, the construction uses 10mm shafts. This model provides reliability, quality and high speed printing.
 

SPECIFICATIONS

Dimensions:

• Dimensions of the printer: 510х560х580 mm (with coil 510х560х740 mm)
• Weight: 15.5 kg

Printing options:

• Printing technology: FDM (Fused Deposition Modeling)
• Printing area: 300x300x340 mm
• Layer height: minimum 50 microns (with nozzle 0.2-0.3 mm), optimal 150-200 microns, maximum 0.6 mm (with nozzle 0.8 mm)
• Print speed: recommended 30 mm / s, maximum recommended 100 mm / s
• Material used: ABS, PLA, HIPS, FLEX, RUBBER (Thread diameter 1.75 mm)
• Heated platform: maximum temperature 120 0С

Electronics:

• MKS Gen V1.4
• LCD display with SD card reader and control button
• Power supply 400 W, 12 V 
• Heating table 328x328 mm

Software:

• firmware: Marlin
• Software: Repetier-Host, Slic3r, Cura
• Compatible with OS: Windows, Mac OS, Linux

Extruder parameters:

• Diameter of the nozzle: 0.4 mm (0.2-0.8 mm)
• Thread diameter: 1.75 mm
• Number of heads: 1 

EQUIPMENT

Electronics:

• MKS Gen V1.4 (1 piece)
• LCD display (1pcs)
• USB cable (1 piece)
• driver stepper motor A4988 (5 pcs)
• stepper motor Nema 17 (4 pcs)
• extruder assembly (1 piece)
• mechanical limit switch (3 pcs)
• power supply 12 V (1 pc)
• heating table (1 piece)
• NTC thermistor 100 kΩ 3950 for heating table (1 pc)
• fan (blowing Hot-End 30x30, blowing out boards 40x40) (2 pcs)
• wires "papa-mama" for elongation-connection of engines, thermistors, limiters with RAMPS 1.4 (20 pcs)
• power cable 220V (1 piece)
• power connector with a button (1 pc)
   

Mechanics:

• set of body parts (steel 3mm, painted black)
• set of polished shafts with a diameter of 10 mm
• transfer screw-nut M5 (movement along the Z-axis) (2 pcs)
• set of nuts, screws, washers, springs
• connection sleeve 5x5 mm (2 pcs)
• linear bearing lm10uu (11 pcs)
• bearing 608ZZ (2 pieces)
• bearing 625ZZ (2 pieces)
• Toothed belt GT-2 (2 pcs)
• toothed pulley GT-2 (2 pcs)
• braid for wires (2 pcs)
• mirror for the heating table (1 pc)
• clamps for mirrors (6 pcs)