由Jeremy_desig创建的Multi-Use Scifi Building (18mm Scale)

loading...
尺寸: 3.75 x 4.05 x 0.15 英寸 x 1
尺寸: 2.56 x 3.82 x 0.35 英寸 x 1
模型描述
3D model of jeremy8077
The models were repaired and checked for printability.

Using Dutchmogul's Scifi Habs and TinkerCad I hacked up his beautiful habs to...显示更多 make this multi-use Scifi edifice. I'm using it for a makeshift clinic in our ongoing Wayfarer campaign and have included a bunch of clinic stuff in the .stl files. This building is in 18mm scale, but could easily be converted to 15mm (scale down 83.3%) or 28mm (scale up 166.6%).

This print was a ton of work in a short amount of time, but it'll be so fun to play with! That is until tonight when my GM wrecks it! Meh, that'll be fun too.

Thank you for looking, happy gaming!

Printer brand:
MakerBot

Printer:
MakerBot Replicator

Rafts:
No

Supports:
No

Resolution:
.2

Infill:
10%

Notes:
I've slowed down my printer and used 3 shells. Also, there is some support built in to the second story where the exterior stairs attach that have to be filed off. This is about a 70 hour print (took me 74), but will be totally fun to play with.
http://twitter.com/Jeremy8077
关于模型设计师
79 models uploaded
简介已审核