3D model of bqeducacion
The models were repaired and checked for printability.
The PrintBot RHINO is an educational robot that can push objects with its dozer and
...Show more take part in "sumobots fights".
The robot has been designed to attach components such as servos, LEDs, push buttons, a buzzer, and other electronics parts.
RhinoBot can be controlled via bluetooth using an android app or also, can operate autonomously.
Printed parts:
You will need to print the following parts:
1 x MainBody
2 x BigWheels
2 x SmallWheels
1 x DozerBlade
1 x BatteryHolder
2 x BezelWheels
Hardware:
2 x Lego Technic Tread - Part - 680c01
or the printed ones in Flexible Filament (thingid:1238921)
9 x M3x10 screw
4 x M3x40 screw
1 x M3x16 screw
16 x M3 nut
1 x Velcro tape
8 x AAA batteries
Tools:
Allen hex key 2.5 Standard
Glue
Small screwdriver
Electronic Parts:
1 x Freaduino UNO (Arduino UNO derivative)
1 x IR sensors for line following
2 x Continous rotation servo
1 x LED
1 x 8 AAA battery holder
Miguel Angel de Frutos
This thing and all other published material cannot be considered as a final product of bq and bq takes no responsibility of its use.
It must be considered as an experimental and early released product developed by the Innovation and Robotics Department staff with the intention to share it and test it as soon as possible within the community.
Printer:
BQ Witbox 2 & Hephestos 2
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
15%
Notes:
Use 20% infill, 245 C and 25 mm/s for the Filaflex Treads on a Hephestos 2
https://www.instagram.com/bq.educacion
