Tevo Tarantula XZ mounting plates. All the acrylic parts I received were not correctly dimensioned which resulted in all the wheels not being able to tighten
...Show more against the extrusion slots. I just had to move the mounting holes closer which solved all the wobble/slack issues.
Note:
I originally printed these in PLA but after a year the tension in the X-axis belt caused the plates to warp. I eventually cut the plates out of a 2mm (too thin, some issues during installation. 3mm would be better) fibreglass board which is super stiff and will probably last forever. You can use these as a template to cut the fibreglass (or carbon fiber) board.
