This is a stand for vape atomizers with standard 510 threadings which fit into the given cavities. The final design reminded me of a flower bouquet, so i called it
...Show more Atouquet, the ATOmizer boUQUET. The pictures shows the two variations for 7 atomizers (the green one is of an older version in fact). In all there are variations for 3, 7, 9, 12 and 15 atomizers. more variations may follow.
Included are STLs with "frames" for better centering on the printing bed in Cura. The infill pattern might need this. The frame itself is thin enough that it isn't printed using standard settings. The *_pure.stl files are the same model without the frame.
Issues and countermeasures: It's a pretty fragile thing after all and the longer stands tended to break in the first versions of this thing, but i think this should print successfully now, even with a mere 0.8 mm outer wall i used for testing.
Z-hops are highly recommended to reduce the risk of single stands being pushed due to slight inaccuracies in the layer printed before. A lowered movement speed further reduces that risk.
The cavities for the 510 threadings are designed pretty snugly (on purpose). If they turn out too tight, try reducing the flow a bit and/or use a negative value (i.e. -0.05 mm) for horizontal expansion.
